Text only | Text with Images

The Hillman & Chrysler Avenger Forum

Avenger Related => Technical => Topic started by: Redassassin on March 14, 2016, 02:05:46 PM

Title: Spark at points but not at plugs
Post by: Redassassin on March 14, 2016, 02:05:46 PM
Trying to get a 1975 1500cc Chrysler Avenger running so I can make sure the engine is all good before I buy it, The dizzy is not secured but is sitting fine when we crank it, there is spark at the points but no spark at the plugs, the rotor turns fine when cranking the engine, any tips of what to look at before I have another crack at getting it running?
Title: Re: Spark at points but not at plugs
Post by: JoKer on March 14, 2016, 04:24:52 PM
is it 180 degrees out? (TDC etc)
Title: Re: Spark at points but not at plugs
Post by: TheMechanicnz on March 14, 2016, 09:18:37 PM
Tried changing your HT leads?
Title: Re: Spark at points but not at plugs
Post by: Redassassin on March 15, 2016, 05:22:51 PM
Managed to get it, swapped over the dizzy with a spare I managed to find, turns out the condenser on the other dizzy is stuffed, Thanks heaps though guys :)
Text only | Text with Images