Main Menu

1979 Chrysler Avenger GL

Started by 79avengerGL, February 18, 2011, 02:51:30 PM

79avengerGL

Selling my avenger because i can't afford to fix it up. don't have a job anymore =[
i was hoping to fix it up all it needs is a new fuse box and loom and needs the ignition hooked up

matte black, hood still original colour (previous owner too lazy to finish the job)
1300cc
all original parts except for grill (kicked out by previous owner)
missing passenger side carpet
cut starlet springs in the front (once again by previous owner, one sides cut shorter than the other >:()
no wof reg on hold
tyres all in good condition

any questions feel free to txt me on 0272635982

$600

avenga

#1
Hi and welcome to the site, Do you have any pictures of your Avenger?

1975 Hillman Avenger 1300 Super, 1972 Chrysler Valiant Charger 770, 1980 Chrysler Avenger 1.3GL

http://www.carphotos.co.nz
RPM Photography

79avengerGL

will be taking some pictures soon

avengertiger

welcome to the forum,the last owner sounded like a bit of a nut!!! anyway photos always help a sale good luck im sure someone on here might be interested,a bit more detail on any rust issues might help also if any of course!

79avengerGL

just remembered also has a custom dash so you can have speakers in the front which is one good thing the previous owner did.


79avengerGL

i can't upload pictures because they are way over the file size limit so if you want pictures i can email them to you

avenga

Email them to me and I will upload them for you or read the "How to post photos on the forum" post

1975 Hillman Avenger 1300 Super, 1972 Chrysler Valiant Charger 770, 1980 Chrysler Avenger 1.3GL

http://www.carphotos.co.nz
RPM Photography


avenga

Great you managed to get some pictures posted.

How far did you get on redoing the electrics? When we last spoke you were trying to replace the coil and ignition. Did you get that replaced and is the engine running?

BTW love the wildcat steering wheel. I use almost the same wheel in my race car.

Interesting dashboard. Is that fibreglass?

1975 Hillman Avenger 1300 Super, 1972 Chrysler Valiant Charger 770, 1980 Chrysler Avenger 1.3GL

http://www.carphotos.co.nz
RPM Photography

79avengerGL

got the coil done but didn't bother to put the ignition in since i knew i couldn't finish it off =/

yea that wheel is much easier to use than the original  ;D

yea i'm pretty sure it is..it turned out pretty well for being home made by the previous owner

avenga

Yeah for a homemade dashboard it looks really good, for my front speakers I put them in the plastic door cubbyholes.

I agree, the old wheels are far to big. I use a modern wheel about that size in my '75. I still have the stock tri-spoke sports wheel in my Charger. It is massive but it is good for the lack of power steering on a big car.

I see it is missing the door card on the front passengers, does it have any of the door cards at all?

Does look like it would be a pretty big project to save that Avenger. From what I see the body looks pretty good in terms of rust, do you know how much bog is under that black paint?. could make a good reshell for a race car or something.

1975 Hillman Avenger 1300 Super, 1972 Chrysler Valiant Charger 770, 1980 Chrysler Avenger 1.3GL

http://www.carphotos.co.nz
RPM Photography

79avengerGL

there is a bit of bog at the back window pillar.

yup it has all door cards..but just incase i'll check again later.

yea i still have the old steering wheel too its sitting in the back you can just see the top of it in one of the pictures.

hunted

hey mate, keen to sell the steering wheel thats on it now? wasnt going to ask but since you still have the old one it will still have one

cheers

79avengerGL

you can have it if you buy the car :D